Saturday 22 January 2011

Have you done this?

I can’t believe I did….

Sewing along nicely

watching for pins

making sure that I slow down

when I get to one

Clunk Clunk!!!

What????

Oh My Goodness!!!

I sewed a pin which was underneath the fabric.

My machine sewed it to the fabric and I had to unpick it with my quick-unpick!!

Pin (Medium)

Right thru the endy bit!

Pin - Copy (Medium)

And…It didn’t even break the needle! Now that is what you call a good needle… Although I did change it before I went on and sewed more.

With out the pins in the way of course.

Hugs to All……..Vicki

27 comments:

  1. I'm guilty I must admit I have done the same thing.

    ReplyDelete
  2. I will raise my hand too! Love those flat flower pins but sometimes they hide.

    ReplyDelete
  3. hahahaha guilty here as well xxx

    ReplyDelete
  4. No....I never did that....hummmmmmmm

    ReplyDelete
  5. I've gotten the metal end of the pin stuck down in my machine before, but I've never sewed over the plastic part! LOL

    ReplyDelete
  6. Well I dont use those flat flower pins although I have sewn over normal pins and bent them badly - I will take that as a warning in case I get to use those pretty pins. Glad to hear you did still change yr needle though!!

    ReplyDelete
  7. OH dear, guilty as charged and more than once too.

    ReplyDelete
  8. Yes I have done this and when I worked in a commercial clothing factory I was on the button attaching machine i sewed into my finger, it broke the button, but not the needle...I had thread sewn into my finger!! *&%@#!!!!!!!

    ReplyDelete
  9. This comment has been removed by the author.

    ReplyDelete
  10. OH how funny... I did that very thing last night... sewing a quilt... Great pins hey....
    Hugs Dawn x x x
    P.S. what were you sewing????

    ReplyDelete
  11. LOL - been there done that! The worst though, was when I was machine embroidering. A thread nest developed on the underside, and the needle broke - the part of the needle that was left in the fabric was CURVED, like an upholstery needle!
    At least you found the pin and didn't accidentally sew it into your project. I've had that happen before too. OUCH.

    ReplyDelete
  12. Oh, yes, definitely done that before. Really a hassle, especially if what you were sewing was quilting a small piece. :P Had to pick it out, sink the thread ends and re quilt.

    Linda

    ReplyDelete
  13. Lucky it was only a pin and not your finger.

    ReplyDelete
  14. your not alone with this one, gives you a fright doesn't it

    ReplyDelete
  15. Broke the needle today when I hit a pin so must've been cheap and nasty ones....the pin looked like a fish hook! I've never sewn into the plastic bit though.....I throw so many out because the plastic bit pulls off!
    XX Sugary hugs lovely!
    Wendy :O)

    ReplyDelete
  16. must admit, haven't done that before, however have managed to bend plenty of pins - I need to slow down and take more care. Find those pins don't appreciate the iron!

    ReplyDelete
  17. LOL ... yes dear Vicki, that is a familiar sight ;o). I've also cut a flower head in half with the rotary cutter ... it plays havoc with the blade!!!
    Love n hugs,
    Joy :o)

    ReplyDelete
  18. Oh Yes many time and I mostly break the needle too.

    ReplyDelete
  19. You're not the only one. Not only have I sewed pins but I'm also an expert in rotary cut them.

    ReplyDelete
  20. I've never done quite that but I have sewed a pin into the finished quilt. Try to get one out then. Not easy.

    ReplyDelete
  21. Of course I did this too. And I have to confess not only once.

    ReplyDelete
  22. I have done that before while making a purse. Didn't realize it until I got the purse all done...guess what? It's still there!!! I managed to wiggle the pin part out and left the "flower" head inside the purse! No way I was going to deconstruct that much of the purse to get the plastic head out!

    ReplyDelete
  23. I have also done that before. It is nerve wracking.
    Micki

    ReplyDelete
  24. Guilty guilty guilty here too... I hate it when that happens.

    ReplyDelete
  25. Easy done and guilty as charged!!!

    ReplyDelete
  26. Pins and fingers are my specialty.Brand new blade in my rotary cutter on Monday and it would not cut!!!!!!-found the culprit--a pin!!

    ReplyDelete
  27. Haha, I know that very well and not just once. But at least the sewing machine needle doesn't break with the flower pins.

    ReplyDelete